EN10305-4 E235 Chemical Composition
Steel Grade |
Mass Percent |
||||||
Grade |
NO. |
C Max. |
Si Max. |
Mn Max. |
P Max. |
Sb Max. |
Al Min. |
E215 |
1.0212 |
0.10 |
0.05 |
0.70 |
0.025 |
0.025 |
0.025 |
E235 |
1.0308 |
0.17 |
0.35 |
1.20 |
0.025 |
0.025 |
- |
E355 |
1.0580 |
0.22 |
0.55 |
1.60 |
0.025 |
0.025 |
- |
EN10305-4 E235 Mechanical Properties
Grade |
Mechanical Properties |
|||||||||||
+C |
+LC |
+SR |
+A |
+N |
||||||||
Rm (Mpa) min |
A % min |
Rm (Mpa) min |
A % min |
Rm (Mpa) min |
ReH (Mpa) min |
A % min |
Rm (Mpa) min |
A % min |
Rm (Mpa) min |
ReH (Mpa) min |
A % min |
|
E215 |
430 |
8 |
380 |
12 |
380 |
280 |
16 |
280 |
30 |
290-340 |
215 |
30 |
E235 |
480 |
6 |
420 |
10 |
420 |
350 |
16 |
315 |
25 |
340-480 |
235 |
25 |
E355 |
640 |
4 |
580 |
7 |
580 |
450 |
10 |
450 |
22 |
490-630 |
355 |
22 |
1. Rm: tensile strength; ReH: yield strength; A: elongation |
EN10305-4 specifies the technical delivery conditions for seamless cold-drawn precision steel tubes of circular cross-section used in hydraulic and pneumatic power systems. These precision tubes are manufactured from normalized, cold-drawn or cold-rolled steel with specified mechanical properties, including a minimum yield strength and elongation. E235 denotes a steel grade characterized by excellent weldability and machinability, ensuring suitability for various engineering applications. These tubes are typically produced with tight dimensional tolerances and smooth surface finishes to meet precise requirements in critical systems. They are commonly used in automotive, mechanical engineering, and other industrial sectors where precision and reliability are paramount.
请输入搜索关键字
确定